Page 1 of 1
help...clone belt
Posted: Sun Oct 19, 2014 3:37 pm
by Rockstar
I need help with my clone belt. I don't know how to get the belt parts to fit and get them put together. If there is someone in the grand rapids area that would be able to get together with me and put me on the right track, I would be very grateful. Thanks
Re: help...clone belt
Posted: Mon Oct 20, 2014 12:12 pm
by BBC527
I've put together a few of these. What kind of belt, and what are the problems you are having?
Re: help...clone belt
Posted: Mon Oct 20, 2014 12:20 pm
by Rockstar
Having trouble with getting the front and back to fit. It's the hard plastic belt. I might have cut the back to short, not sure
Re: help...clone belt
Posted: Mon Oct 20, 2014 12:22 pm
by Ripcode
Is it the KW ABS belt kit?
Re: help...clone belt
Posted: Mon Oct 20, 2014 3:42 pm
by Rockstar
It's from imperialsurplus.com , I found him on clonetropper.net
Re: help...clone belt
Posted: Mon Oct 20, 2014 7:42 pm
by Ripcode
rockstar wrote:It's from imperialsurplus.com , I found him on clonetropper.net
So yes it's the KW ABS belt.
Do you have an picture of what the issue is?
Re: help...clone belt
Posted: Mon Oct 20, 2014 8:28 pm
by Rockstar
- 1413851061820.jpg (2.57 MiB) Viewed 18349 times
- 1413850834379.jpg (2.85 MiB) Viewed 18348 times
- 1413850666634.jpg (2.72 MiB) Viewed 18350 times
Re: help...clone belt
Posted: Mon Oct 20, 2014 8:33 pm
by Rockstar
The pics are very bad, this phone of mine takes bad pics. Don't know if you can make anything out
Re: help...clone belt
Posted: Mon Oct 20, 2014 8:38 pm
by BBC527
Here is my build thread. I may have some shots of the issue with my belt as I was building it.
http://forum.clonetroopers.net/index.ph ... opic=18312
Also, I have a build thread on here for the same 442nd build.
Let me know if there is anything else I can help with.
Re: help...clone belt
Posted: Tue Oct 21, 2014 10:34 am
by Ripcode
Use a hosting site for your pics, as opposed to you attaching them. flickr, photobucket, etc.
Did you look here for the belt assembly instructions?
http://imperialsurplus.com/carmor_belt.html
Re: help...clone belt
Posted: Tue Oct 21, 2014 3:34 pm
by Rockstar
Ya I used imperialsurplus.com pics for all of the parts but the belt has been a speed bump in this my first armor build
Re: help...clone belt
Posted: Tue Oct 21, 2014 3:37 pm
by Rockstar
Does the abdomen plate just float on top of the dipper?
Re: help...clone belt
Posted: Wed Oct 22, 2014 9:12 am
by DeafTrooper
There is a small gap between the ab plate and the cod piece Are you on the clonetrooper detachment?
www.clonetroopers.net Lots of great advice on there.
Re: help...clone belt
Posted: Wed Oct 22, 2014 11:53 am
by Ripcode
rockstar wrote:Ya I used imperialsurplus.com pics for all of the parts but the belt has been a speed bump in this my first armor build
BBC527's link to his build thread showed how he was able to add length to his belt. You should check that out.
Re: help...clone belt
Posted: Wed Oct 22, 2014 3:49 pm
by Rockstar
Ya I used his build link and I think my questions are answered. Thanks for all the help it's been great
Re: help...clone belt
Posted: Fri Oct 24, 2014 12:25 pm
by BBC527
Glad we could help.
If there are any other questions, just give us a shout.