Page 1 of 1
E-11
Posted: Thu Jan 08, 2015 12:24 am
by Cris1992
Any modified an E-11? Mines on the way
and just wanted some pointers while its en route so I can be ready for the task at hand
Re: E-11
Posted: Thu Jan 08, 2015 2:22 am
by Brewski
What kind of blaster kit did you order ?
Re: E-11
Posted: Thu Jan 08, 2015 2:34 am
by Cris1992
Doopydoos conversion kit
http://www.doopydoos.com/stormtrooper-e ... 2636-p.asp
Blaster
http://www.doopydoos.com/stormtrooper-e ... 2636-p.asp
Not the same prices I had to pay for. I found better deals but that what on my laptop (on phone now). I should have them all at the latest of the 18th of this month.
Re: E-11
Posted: Thu Jan 08, 2015 12:21 pm
by Brewski
I don't know too much about doopydoo's, but I know that a lot of Garrison and Legion members use this kit. Almost all of my stuff came from England, blaster, armor, etc. Look forward to seeing your progress
Re: E-11
Posted: Thu Jan 08, 2015 12:54 pm
by Cris1992
Thank god for YouTube at the least
if I get lost I can always see it done there. Once I get it done I may upload some shots of it.
Re: E-11
Posted: Thu Jan 08, 2015 2:05 pm
by Flash
Wash your parts really good with hot soap and water before you pain them. Then wash them again. My doopy doos kit is all held together with E6000 and still going strong.
Re: E-11
Posted: Fri Jan 09, 2015 12:31 am
by Wags
I love E6000. It sticks to everything. And is removable if you F up.
Those are resin parts. Cyanoacrylte (fancy super glue) works AWESOME on resin. And is strong as all get out. IF you dont have the patience for E6000.
Re: E-11
Posted: Fri Jan 09, 2015 2:10 am
by Cris1992
Wags wrote:I love E6000. It sticks to everything. And is removable if you F up.
Those are resin parts. Cyanoacrylte (fancy super glue) works AWESOME on resin. And is strong as all get out. IF you dont have the patience for E6000.
Does E6000 have a long dry time?
Re: E-11
Posted: Fri Jan 09, 2015 10:31 am
by Mr Fett
Usually 24 hours.
Re: E-11
Posted: Fri Jan 09, 2015 11:44 am
by R4ZORBL4DE
Take a look over at
http://www.whitearmor.net
Lots of guys MOD Doopy Doo's all the time over there.
I just picked up a HyperFirm E-11 yesterday and came as you see it.
Re: E-11
Posted: Fri Jan 09, 2015 10:17 pm
by Husky
Here's a YouTube video I used to make mine:
http://youtu.be/hEwoSCEWRms
Re: E-11
Posted: Mon Jan 12, 2015 7:25 pm
by Wags
It 24 hrs for full cure time. Usually tacky and will hold in a few hours. Depends on the temperature at the time.
I would still use super glue. There is no need to use E6000. And its very thick, so you might get a lot of "oozing" from between the parts.
Re: E-11
Posted: Mon Jan 12, 2015 10:24 pm
by DeafTrooper
The "oozing" areas are pretty easy to clean up, though. Just let it partially cure and rub it off. I made my DC15 with E-6000 and it worked pretty well. Plus, with E-6000, if you screw things up, it's easier to take apart than when using crazy glue. I should know that more than anybody.